Internal Fridge Water Filter for CS-52 3M 5586605 5553629

Replacement Internal fridge water filter for CS-52 3M 5586605 CS-452 5553629

• Made of premium quality food-grade safe material.
• Easy to install, no leakage issues
• Reduces chlorine, unpleasant tastes and odours in tap water
• Retains beneficial minerals
• Produces clean, fresh and delicious water and ice

Important: Some manufacturers use the same fridge model number for fridges supplied with both internal and external filter systems, please make sure that your fridge uses an Internal water filter before ordering this item.

Note: Not original compatible filter, the manufacturers and part numbers are for reference only.

Installion Instrcutions:

• Flow Rate: 1.9 lpm (0.5 gpm)
• Operating Temperature: 0.6°C - 38°C
• Operating Pressure: 140 kPa (20psi) - 827 kPa (120psi)
• Technology: High quality Carbon Block
• Function: Chemical and Mechanical Reduction
• Capacity: 1,500 Gallons (5,678 Litres)
• Service Life: 6 months

Compatible Models:

The CS-52WF comparable with the following part numbers:

3M/Cuno CS-52, CS-452, CS-522, OCS CS-52, CS-51, OCS CS-51, 55866-05, 5586605, 55866-06, 5586606, EVOLFLTR10

640565, AP3961137, 1257074

Whirlpool WHKFR-PLUS, WHKFR Plus, WHKF-R-PLUS, WHCF-R-PLUS, W1085590, 2168701

56932, 640565, 1257074, 2168701, 70020002518, AP3961137

Please note this part is a non genuine compatible spare part and the manufacturers' names and part numbers have been used for reference purposes only.

Please use safe PayPal payment, you can pay with your credit card/debit card via PayPal.

Item will be sent out the next business day from our Australian warehouse. We will inform you via e-mail when items are sent.

Installation:

1. Disconnect the refrigerator water supply and unplug the refrigerator.
2. Press the knob at the top of the filter case and remove the cover from the compartment.
3. Turn the filter 1/4 turn to the left (counter clockwise).
4. Pull the filter straight out and discard.
5. Remove the protective cap from the new water filter.
6. Insert the new filter into the holder.
7. Turn the filter 1/4 turn to the right (clockwise) to lock it into place.
8. Replace the filter cover back into the compartment.
9. Reconnect the refrigerator water supply and plug the refrigerator back in.
10. Flush the new filter for 5 minutes to purge the system.
11. Reset the "change filter" indicator light:
12. Press and hold the Water Filter Reset button for 5 seconds.
13. Newer models: Press the options button until the "filter change" function is selected, and then press the selection button "+" or "-" until the "filter Change" display goes out.